About

The Hackspace has a Bernina Bernette 340 Deco Embroidery Machine, donated by Brett.
The machine arrived without it's original hoops so we custom designed and 3d printed our own version matching Hoop A, courtesy of DJ. Since we only have Hoop A, the machine is only capable of producing patterns up to 116x110mm in size.
How to access
Reach out to Jacob in #textiles on Discord if you want to access and use the Embroidery machine. He'll also be happy to take you through how to use it.
How to use
The following is a quick summary of the manual, you can find a more detailed guide on the given pages in the manual.
Setting up
Pages 7-20
Prepare Hoop with fabric and paper backing (We have tear-away paper backing available at the space)
Prepare and install the bobbin
Install the hoop
Thread with your initial coloured thread
Select your pattern
Drop the presser foot
Adjust the tension
Press the green button
Preparing the hoop
First cut a section of the tear-away paper backing sized to have a good border around the inner hoop.
Then cut a similar sized piece of fabric, and arrange the pieces bottom to top: Outer hoop, paper backing, fabric, inner hoop.
Slot the inner hoop into place, trapping the fabric between the inner and outer hoop and tighten the screw on the outer hoop, pulling the fabric tight as the screw is tightened. Do not tighten the screw all the way, just enough for the fabric to be held in place.
Install the hoop into the machine on the moving arm, securing in place using the wing nut.
Threading
Pages 11-14
Installing the bobbin
Page 10
Loading a pattern
Done via USB
Navigate to the 
USB menu option
Browse for your pattern
Bobbin Winding
Page 9
Tips
The machine is very picky about what USB sticks it will accept, we have found a couple that it likes, please don't lose or break them
Useful Links
Manual - https://www.bernina.com/bernina/media/Support/Sewing_Quilting_Embroidery/Out_of_Print_Manuals/bernette-Deco-340-Manual.pdf