⚠️ RISK ASSESSMENT
Download link: #205 - Laser Cutter - 260819.pdf
# | Identify Hazards | Who maybe Harmed | Severity | Control Measures | Likelihood | Risk Rating |
1 | Electric shock | User | High | All electrical equipment should be checked for electrical safety prior to use. Equipment must not be used unless they have a PAT test label on. It is the users responsibility to do a visual check of the equipment. If any defects are found (i.e. cracked casing, defect in lead etc) the equipment is not to be used, to be quarantined, safety officer informed, and a defect label attached. Induction covers inspection of equipment before usage | Low | Med |
2 | Misuse of equipment | User, Bystander | High | Members are inducted into the correct use of the equipment and understand associated risks. Members found to be deliberately misusing equipment may have their use of the machine restricted or revoked altogether. | Low | Med |
3 | Eye exposure to laser | User, Bystander | High | Covered in training/induction Close lid during operation Ensure leather skirt is in place to block reflected laser light from under lid Interlock in place to prevent laser firing with access hatch open Warning signs on access panels without interlock Required induction includes full safety training including emergency shutoff Demonstrated competence required before training signed off | Low | Med |
4 | Risk of fire | User, Bystander | High | Covered in training/induction Check bed and slats are clean of char and debris Only use approved materials Remove plastic coverings and any loose paper masking Any paper masking must be securely stuck down Choose appropriate settings for the material Do not cut more than one layer of material at a time Remain at the machine for the duration of the cut and use the monitor to keep an eye on the material Be aware some material may smoulder undetected (e.g. corrugated cardboard) Know how to stop the laser in case of fire Clean the bed of debris and char after each use Know where the nearest fire blanket/extinguisher is and how to use them Know how to raise the alarm in case of fire Be aware of the fire procedures posted at each exit point | Med | Med |
5 | Hazardous fumes | User, Bystander | Med | Covered in training/induction Monitor the air quality monitor behind the laser: stop cutting if red, proceed with caution if amber Only use approved materials - no PVC or halide containing materials, no polycarbonate Allow smoke to clear completely from the enclosure before lifting lid Stop cutting if others in the space complain of breathing difficulties | Low | Low |
6 | Injuries during material handling | User, Bystander | Low | Covered in training/induction Be aware of bystanders when loading and unloading the laser Be aware of potential for sharp edges and wear gloves if needed Potential for lasered materials to cause burns - allow to cool First aid kit available in kitchen area | Low | Low |